PMag Controller with Analog Outputs

2 thoughts on “PMag Controller with Analog Outputs

  1. How do you use it to diagnose pmag problems such as a bad plug or coil pack starting to fail.
    Looks like the perfect product to monitor pmag.

    1. Thanks for dropping by. A reported dwell time between 2 & 3 is normal. A higher number or 0 indicates an issue.
      Based on writeup from E-Mag available for download at their site:
      “Series 114 units have components that report the ignition coil discharge rate.
      a. A rapid discharge rate indicates a spark plug or plug lead is fouled (shorted).
      b. A slow discharge rate indicates a spark plug or plug lead is open (broken).

Leave a Reply to Lancair 360 Cancel reply

Scroll to top